Changeflow GovPing Government General Gentuity HF-OCT Imaging System - Potential Repe...
Urgent Enforcement Amended Final

Gentuity HF-OCT Imaging System - Potential Repeated Frames During Pullback

Favicon for changeflow.com FDA Device Recalls (Class II)
Filed
Detected
Email

Summary

Gentuity, LLC initiated a Class II recall for 184 HF-OCT Imaging System consoles (Model G10-01, Software version 23.2.13) distributed in the US and internationally. The recall addresses the potential for repeated frames during HF-OCT pullback when the console software (versions 21.11 to 23.3.13) is used with Vis-Rx and Vis-Rx Prime catheters, which may compromise longitudinal (length) measurement accuracy. The FDA determined the cause to be device design. Affected customers must follow revised Operator Manual procedures until updated software is installed within 6 months.

“The customers will be required to follow the updated instructions to correct for repeated frames per the revised Operator Manual to address longitudinal measurement accuracy until the updated version of the software that addresses this issue is installed on the console within 6 months.”

FDA , verbatim from source
Published by FDA on accessdata.fda.gov . Detected, standardized, and enriched by GovPing. Review our methodology and editorial standards .

What changed

Gentuity issued an urgent medical device recall on March 23, 2026, covering 184 HF-OCT Imaging System consoles (Model G10-01, software version 23.2.13) distributed worldwide. The firm identified a design-related defect causing repeated frames during pullback when specific console software versions are used with Vis-Rx or Vis-Rx Prime catheters, resulting in inaccurate longitudinal measurements. The recall applies to 28 units in the US (CA, FL, GA, IL, MA, MN, NJ, NY, OH, PA, TX) and 156 units outside the US (Belgium, Japan).

Affected healthcare providers and facilities using Gentuity HF-OCT consoles must follow the updated instructions in the revised Operator Manual to correct for repeated frames per-unit until the software update (version addressing this issue) is installed on the console within 6 months. The FDA has classified this as a Class II recall, indicating temporary or reversible health consequences. Healthcare facilities should identify any in-use units matching the affected model numbers and lot/serial numbers, implement the interim manual workarounds, and coordinate with Gentuity for the forthcoming software correction.

Archived snapshot

Apr 20, 2026

GovPing captured this document from the original source. If the source has since changed or been removed, this is the text as it existed at that time.

Class 2 Device Recall Gentuity HFOCT Imaging System

- Databases

| |

| 510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards |

| CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC | |

| New Search | ) |

| | Class 2 Device Recall Gentuity HFOCT Imaging System | |

Date Initiated by Firm March 23, 2026
Date Posted April 16, 2026
Recall Status Open , Classified
Recall Number Z-1823-2026
Recall Event ID 98619
510(K)Number K242966
Product Classification Catheter, intravascular, diagnostic - Product Code DQO
Product Gentuity HF-OCT Imaging System Model G10-01;
Software version 23.2.13;
Code Information Model Number: G10-01;

UDI-DI: 00859910007032;
Lot/Serial Number: 23C0113, 22J0101, 20A0202, 23F0101, 22F0113, 22L0100, 26B0203, 26B0200, 26B0204, 26B0202, 26B0201, 25L0302, 22E0204, 22J0102, 24H0101, 24H0102, 23K0201, 20A0203, 22K0306, 20A0201, 25J0200, 23C0110, 22K0305, 25E0100, 22F0110, 22K0304, 22K0302, 24B0107;
OUS Lot numbers: 21G1900, 21G1901, 21G1902, 21G1903, 21G1904, 21H1101, 21H1102, 21H1103, 21H1104, 21H1105, 22C2300, 22C2301, 22C3000, 22D2600, 22D2700, 22D2701, 22D2702, 22D2705, 22E0500, 22E0501, 22F2700, 22F2701, 22F2702, 22F2703, 22F2704, 22G2600, 22G2601, 22G2700, 22H2900, 22H2901, 24B2100, 24B2101, 24B2102, 24B2103, 24B2104, 24C1301, 24C1302, 24C1303, 24C1304, 24C1305, 24D1504, 24D1505, 24D1506, 24D1507, 24D1508, 24E0800, 24E0801, 24E0802, 24E0803, 24E0804, 24F2408, 24F2409, 24F2410, 24F2411, 24F2412, 24G2205, 24G2206, 24G2207, 24G2208, 24G2209, 24H1400, 24H1401, 24H1402, 24H1403, 24H1404, 24M1000, 22L3000, 22L3001, 23A1904, PDA23-001, 23C2202, 23C2203, 23E0900, 23E0901, 23E0902, 23F2704, 23F2705, 23G2601, 23G2602, 23G2603, 23G2604, 23G0700, 23G0701, 23H3000, 23H3001, 23H3002, 23H3003, 23M1102, 23M1103, 23M1104, 23M1301, 24B2105, 24B2106, 24C2200, 24C2201, 24H1900, 24H1901, 24H1902, 24J0500, 24J0501, 24J0502, 24M1101, 24M1102, 24M1103, 24M1104, 24M1105, 25C0320, 25C0321, 25C0322, 25C0323, 25C0324, 25F2500, 25F2501, 25F2502, 25G3103, 25G3104, 25G3105, 25J0800, 25J0801, 25J0802, 25J2300, 25K0909, 25K0910, 25L0306, 25L0307, 25M0203, 25M0201, 25M0202, 26B0310, 26B0311, 26B2300, 26B1900, 26B1901, 26B1902; |
| FEI Number | 3011578544 |
| Recalling Firm/
Manufacturer | Gentuity, LLC
142 North Rd Ste G
Sudbury MA 01776-1142 |
| For Additional Information Contact | Jason Rudy
617-233-2979 |
| Manufacturer Reason
for Recall | The potential for repeated frames during HF-OCT pullback when using the Gentuity HF-OCT Console (software version 21.11 to 23.3.13) with the Vis-Rx and Vis-Rx Prime catheters. This correction is intended to ensure that users are fully informed of how to recognize, avoid, and mitigate this condition to maintain accurate longitudinal (length) measurements during OCT imaging. |
| FDA Determined
Cause | Device Design |
| Action | On March 23, 2026, URGENT: MEDICAL DEVICE RECALL letters were sent to customers.
Actions to be taken:
The customers will be required to follow the updated instructions to correct for repeated frames per the revised Operator Manual to address longitudinal measurement accuracy until the updated version of the software that addresses this issue is installed on the console within 6 months. |
| Quantity in Commerce | 184 units (28 US, 156 OUS) |
| Distribution | Worldwide - US Nationwide distribution in the states of CA, FL, GA, IL, MA, MN, NJ, NY, OH, PA, TX and the countries of Belgium, Japan. |
| Total Product Life Cycle | TPLC Device Report |

| 1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
3 The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes. | |

| 510(K) Database | 510(K)s with Product Code = DQO |

Get daily alerts for FDA Device Recalls (Class II)

Daily digest delivered to your inbox.

Free. Unsubscribe anytime.

About this page

What is GovPing?

Every important government, regulator, and court update from around the world. One place. Real-time. Free. Our mission

What's from the agency?

Source document text, dates, docket IDs, and authority are extracted directly from FDA.

What's AI-generated?

The summary, classification, recommended actions, deadlines, and penalty information are AI-generated from the original text and may contain errors. Always verify against the source document.

Last updated

Classification

Agency
FDA
Filed
March 23rd, 2026
Instrument
Enforcement
Branch
Executive
Legal weight
Binding
Stage
Final
Change scope
Substantive

Who this affects

Applies to
Medical device makers Healthcare providers
Industry sector
3345 Medical Device Manufacturing
Activity scope
Medical device recall Diagnostic imaging Catheter use
Geographic scope
United States US

Taxonomy

Primary area
Medical Devices
Operational domain
Quality Assurance
Compliance frameworks
GxP
Topics
Product Safety Healthcare

Get alerts for this source

We'll email you when FDA Device Recalls (Class II) publishes new changes.

Free. Unsubscribe anytime.

You're subscribed!