Changeflow GovPing Government & Legislation Heavy-Duty Vehicle CO2 Target Flexibility for M...
Priority review Rule Amended Final

Heavy-Duty Vehicle CO2 Target Flexibility for Manufacturers

Favicon for www.consilium.europa.eu EU Council Press Releases
Published March 30th, 2026
Detected March 30th, 2026
Email

Summary

The Council of the EU formally adopted a targeted amendment to CO2 emission standards for heavy-duty vehicles, introducing temporary flexibility for manufacturers on 2030 reduction targets. The amendment allows manufacturers of heavy lorries (over 16t) and certain buses (over 7.5t) to earn more emission credits between 2025-2029 by comparing against annual targets rather than stricter linear trajectories. The regulation will enter into force 20 days after publication in the Official Journal.

What changed

The Council of the EU adopted an amendment to Regulation (EU) 2019/1242 on CO2 emission standards for heavy-duty vehicles. The key change introduces a revised emission credit calculation mechanism for the period 2025-2029: manufacturers of heavy lorries (over 16t) and certain bus categories (over 7.5t) can now accumulate credits if their emissions fall below their annual CO2 targets rather than the stricter linear reduction trajectory. Urban buses are excluded from this flexibility as zero-emission deployment is already advanced in that segment. The underlying targets remain unchanged (15% reduction by 2025, 43% by 2030, 90% by 2040).

Manufacturers of affected heavy-duty vehicles should review their compliance strategies to leverage the new credit calculation mechanism. The regulation enters into force 20 days after publication in the Official Journal of the EU, making it directly applicable across all member states. The substantial rules on CO2 emission standards are scheduled for revision in 2027, suggesting further changes may be ahead. Companies should ensure their reporting systems can accommodate the revised credit calculation methodology.

What to do next

  1. Review the revised emission credit calculation methodology for 2025-2029 compliance periods
  2. Update fleet emissions tracking systems to leverage the new annual target comparison instead of linear trajectory
  3. Monitor the 2027 scheduled revision to CO2 emission standards for heavy-duty vehicles

Source document (simplified)

  • Council of the EU
  • Press release
  • 30 March 2026 10:38

Heavy-duty vehicles: Council adopts targeted flexibility for manufacturers to comply with CO2 targets


Today, the Council formally adopted a targeted amendment to the regulation on CO2 emission standards for heavy-duty vehicles. The new rules introduce a temporary flexibility for manufacturers to comply with their 2030 CO2 emissions reduction targets. The amendment does not alter the the long-term reduction targets.

This amendment recognises the structural challenges currently faced by the sector, particularly the slow deployment of public charging infrastructure along motorways. It supports a smooth and steady transition towards zero-emission mobility without altering the EU’s ambitious long-term climate targets.

Revised calculation for emission credits

The existing EU law sets the first-ever CO2 emissions reduction targets for new heavy-duty vehicles, comprising trucks, buses and coaches (set at 15% reduction from 2025, 43% from 2030, and rising to 90% in 2040). In order to prove compliance, heavy-duty vehicle manufacturers can earn emission credits if their fleet performs better than a defined ‘reduction trajectory’, which is a linear trajectory connecting targets between five-year periods.

Between 2025 and 2029, manufacturers can now accumulate credits if their emissions fall below their own specific annual CO2 emissions targets rather than the stricter linear reduction trajectory. This temporary and targeted flexibility would allow them to generate more emission credits in the years leading up to 2030 and therefore facilitate their compliance from 2030 onwards. The flexibility is intended to incentivise earlier deployment of zero-emission heavy-duty vehicles.

The updated credit calculation mechanism applies specifically to heavy lorries (over 16t) and certain bus categories (over 7.5t). It does not apply to urban buses, as the deployment of zero-emission buses is already well-advanced and less dependent on long-distance motorway infrastructure.

Clean mobility is the future of the EU but the path towards it is not always linear. With this timely and pragmatic amendment, we give heavy-duty vehicles manufacturers and investors the flexibility and predictability they need to navigate this transition, while electric charging stations are being deployed across Europe.

Maria Panayiotou, Minister for Agriculture, Rural Development and Environment of the Republic of Cyprus

Next steps

The regulation will now be published in the Official Journal of the EU and will enter into force 20 days later. The new rules on calculating emission credits for heavy-duty vehicles will then become directly applicable in all EU countries.  The substantial rules on CO2 emission standards for heavy-duty vehicles are due for revision in 2027.

Background

This targeted amendment is a key component of the automotive package presented by the Commission on 16 December 2025, to help the car sector in its transition to clean mobility. The Council and the European Parliament swiftly agreed to adopt the Commission proposal without further changes, ensuring regulatory certainty for the transport sector.

While trucks, buses, and coaches only represent about 2% of vehicles on EU roads, they are responsible for more than 25% of road transport greenhouse gas emissions


Visit the meeting page

Press contacts


Topics
- Environment
- Climate
- Transport

Named provisions

Temporary Flexibility Mechanism Revised Calculation for Emission Credits Heavy Lorries (Over 16t) Certain Bus Categories (Over 7.5t)

Source

Analysis generated by AI. Source diff and links are from the original.

Classification

Agency
EU Council
Published
March 30th, 2026
Compliance deadline
April 19th, 2026 (20 days)
Instrument
Rule
Legal weight
Binding
Stage
Final
Change scope
Substantive

Who this affects

Applies to
Transportation companies Manufacturers
Industry sector
3361 Automotive Manufacturing 4841 Trucking & Logistics 4811 Air Transportation
Activity scope
CO2 Emission Standards Vehicle Manufacturing Compliance
Threshold
Heavy lorries over 16 tonnes; certain bus categories over 7.5 tonnes. Excludes urban buses.
Geographic scope
European Union EU

Taxonomy

Primary area
Environmental Protection
Operational domain
Compliance
Topics
Transportation Climate Change

Get Government & Legislation alerts

Weekly digest. AI-summarized, no noise.

Free. Unsubscribe anytime.

Get alerts for this source

We'll email you when EU Council Press Releases publishes new changes.

Optional. Personalizes your daily digest.

Free. Unsubscribe anytime.