PHMSA Incorporates ASTM D2564-2024 PVC Solvent Cement Standard by Reference

Content

ACTION:

Direct final rule (DFR); request for comments.

SUMMARY:

This DFR amends PHMSA's regulations to incorporate by reference an updated edition of industry standard ASTM D2564, Standard
Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems. This updated standard will maintain
or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in
the National Technology Transfer and Advancement Act (NTTAA) of 1995.

DATES:

The DFR is effective January 1, 2027, unless adverse comments are received by June 23, 2026. If adverse comments are received,
notification will be published in the
Federal Register
before the effective date withdrawing the rule and publishing a notice of proposed rulemaking to provide an additional opportunity
for public comment. Compliance after June 23, 2026 is authorized. The incorporation by reference of certain material listed
in this rule is approved by the Director of the Federal Register as of January 1, 2027.

ADDRESSES:

You may submit comments identified by the Docket Number PHMSA-2026-1526 using any of the following methods:

E-Gov Web: https://www.regulations.gov. This site allows the public to enter comments on any
Federal Register
notice issued by any agency. Follow the online instructions for submitting comments.

Mail: Docket Management System: U.S. Department of Transportation, 1200 New Jersey Avenue SE, West Building Ground Floor, Room W12-140,
Washington, DC 20590-0001.

Alternatively, hand delivery is available to this address between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays.

Fax: 1-202-493-2251.

For commenting instructions and additional information about commenting, see
SUPPLEMENTARY INFORMATION
.

FOR FURTHER INFORMATION CONTACT:

Brianna Wilson, Transportation Specialist, 1200 New Jersey Avenue SE, Washington, DC 20590, by phone at 771-215-0969 or email
at brianna.wilson@dot.gov.

SUPPLEMENTARY INFORMATION:

I. General Discussion

Through this DFR, PHMSA is incorporating by reference an update to a voluntary, consensus industry technical standard already
incorporated by reference within 49 CFR part 192. Specifically, PHMSA is updating the referenced edition of industry standard
ASTM D2564, Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems, to the reapproved
2020 edition (ASTM D2564).

ASTM D2564 presents the current requirements for solvent cements that are used to join PVC piping systems. It addresses the
requirements in Specification D1784 regarding PVC pipe that was created from compounds and includes Practice D2855's procedure
for joining PVC fittings and pipe.

A reference to the 2024 edition of this standard will replace the existing reference in § 192.281 to ASTM D2564-20, Standard
Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems, approved August 1, 2020. (1) In parallel with incorporating by reference the 2020 edition in August 2025, PHMSA continued its technical review of more
recent editions of the standard for potential incorporation in its regulations. Based on that technical review, PHMSA now
supports further updating of the standard to the 2024 version.

This updated standard will maintain or improve public safety, prevent regulatory confusion, and reduce compliance burdens
on stakeholders. The National Technology Transfer and Advancement Act (NTTAA) of 1995 (15 U.S.C. 272 (note)) directs Federal
agencies to, “when practical and consistent with applicable laws, use technical standards developed by voluntary consensus
standard bodies instead of government-developed technical standards.” Consistent with that mandate, PHMSA incorporates more
than 80 industry standards by reference into the Federal Pipeline Safety Regulations (49 CFR parts 190-199); however, many
standards become outdated over time as new editions become available. 49 U.S.C. 60102(l) directs PHMSA to update incorporated industry standards.

Updating this standard ensures better alignment of PHMSA's regulations with innovations in operational and management practices,
materials, testing, and technological advancements; enhances compliance by avoiding conflict between different versions of
the same industry standards; and facilitates safety-focused allocation of resources by pipeline operators. PHMSA technical
experts have evaluated the changes in the updated edition of ASTM D2564 and concluded it will either maintain or enhance the
protection of public safety. These updates effectively mitigate safety gaps by incorporating innovations in equipment design,
operational and maintenance practices, and testing, while addressing latent vulnerabilities that were historically unidentifiable
due to the technical limitations of legacy data-gathering and monitoring capabilities. Indeed, PHMSA on August 21, 2025, published
a final rule updating the reference within part 192

to the 2020 edition of this standard after preliminarily finding the revisions in that edition enhanced pipeline safety (90
FR 40749); PHMSA's evaluation of the handful of changes introduced in the standard since 2020 yield a similar conclusion regarding
their safety impact. PHMSA further concludes that the direct final rule's updated standard is technically feasible, reasonable,
cost-effective, and practicable because of its respective anticipated commercial and public safety benefits; and because the
benefits better support PHMSA's safety priorities compared to alternatives, thereby justifying any associated compliance costs.

Availability of Materials to Interested Parties

Pursuant to section 24 of the Pipeline Safety, Regulatory Certainty, and Job Creation Act of 2011 (Pub. L. 112-90, codified
at 49 U.S.C. 60102(p)), “the Secretary may not issue a regulation pursuant to this chapter that incorporates any documents
or portions thereof unless the documents or portions thereof are made available to the public, free of charge.” The standard
incorporated in this direct final rule is available from the following website: https://www.astm.org/standards-and-solutions/standards-and-publications/reading-room. The material can also be obtained by interested parties through the applicable publisher contact information listed in § 192.7.
Additional information regarding standards availability can be found at https://www.phmsa.dot.gov/standards-rulemaking/pipeline/standards-incorporated-reference.

Commenting Instructions: Please include the docket number PHMSA-2026-1526 at the beginning of your comments. If you submit your comments by mail, submit
two copies. If you wish to receive confirmation that PHMSA received your comments, include a self-addressed stamped postcard.
Internet users may submit comments at https://www.regulations.gov.

Note:

Comments are posted without changes or edits to https://www.regulations.gov, including any personal information provided. There is a privacy statement published on https://www.regulations.gov.

Privacy Act: In accordance with 5 U.S.C. 553(c), DOT solicits comments from the public to inform its rulemaking process. DOT posts these
comments, without edit, including any personal information the commenter provides, to our docket at https://www.regulations.gov. You may review DOT's complete Privacy Act Statement by visiting https://www.dot.gov/privacy.

Confidential Business Information: Confidential Business Information (CBI) is commercial or financial information that is both customarily and actually treated
as private by its owner. Under the Freedom of Information Act (FOIA, 5 U.S.C. 552), CBI is exempt from public disclosure.
It is important that you clearly designate the comments submitted as CBI if: your comments responsive to this document contain
commercial or financial information that is customarily treated as private; you actually treat such information as private;
and your comment is relevant or responsive to this notice. Pursuant to 49 CFR 190.343, you may ask PHMSA to provide confidential
treatment to information you give to the agency by taking the following steps: (1) mark each page of the original document
submission containing CBI as “Confidential;” (2) send PHMSA, along with the original document, a second copy of the original
document with the CBI deleted; and (3) explain why the information that you are submitting is CBI. Submissions containing
CBI should be sent to Brianna Wilson, Standards and Rulemaking Division, Pipeline and Hazardous Materials Safety Administration
(PHMSA), 2nd Floor, 1200 New Jersey Avenue SE, Washington, DC 20590-0001, or by email at brianna.wilson@dot.gov. Any materials PHMSA receives that is not specifically designated as CBI will be placed in the public docket.

Docket: For access to the docket to read background documents or comments received, go to http://www.regulations.gov. Follow the online instructions for accessing the docket. Alternatively, you may review the documents in person at the street
address listed above.

II. Regulatory Analysis and Notices

A. Legal Authority

This direct final rule is published under the authority of the Secretary of Transportation set forth in the Federal Pipeline
Safety Laws (49 U.S.C. 60101 et seq.) and delegated to the PHMSA Administrator pursuant to 49 CFR 1.97. PHMSA has determined that this direct final rule—which
updates an industry standard already incorporated by reference into its regulations—is unlikely to elicit significant adverse
comment. See 49 U.S.C. 60102(b)(6)(A). PHMSA similarly finds that publication of a proposed rulemaking on which comment is solicited would
be “unnecessary” pursuant to section 553(b)(B) of the Administrative Procedure Act (5 U.S.C. 551 et seq.) because this rulemaking merely adopts an updated version of an industry standard reflecting a broad consensus among affected
industry stakeholders.

B. Executive Order 12866

E.O. 12866, Regulatory Planning and Review, as implemented by DOT Order 2100.6B (“Policies and Procedures for Rulemaking”) and DOT Order 2100.7 (“Ensuring Reliance upon
Sound Economic Analysis in Department of Transportation Policies, Programs, and Activities”), requires agencies to regulate
in the “most cost-effective manner,” to make a “reasoned determination that the benefits of the intended regulation justify
its costs,” and to develop regulations that “impose the least burden on society.” In arriving at those conclusions, E.O. 12866
requires that agencies should consider “both quantifiable measures . . . and qualitative measures of costs and benefits that
are difficult to quantify” and “maximize net benefits . . . unless a statute requires another regulatory approach.” E.O. 12866
also requires that “agencies should assess all costs and benefits of available regulatory alternatives, including the alternative
of not regulating.” DOT Order 2100.6B directs that PHMSA and other Operating Administrations must generally choose the “least
costly regulatory alternative that achieves the relevant objectives” unless required by law or compelling safety need. DOT
Order 2100.6B also specifies that regulations should generally “not be issued unless their benefits are expected to exceed
their costs” except where required by law or compelling safety need. DOT Order 2100.7 requires that “all rulemaking activities
shall be based on sound economic principles and analysis supported by rigorous cost-benefit requirement.”

E.O. 12866 and DOT Order 2100.6B also require that PHMSA submit “significant regulatory actions” to the Office of Information
and Regulatory Affairs (OIRA) within the Executive Office of the President's Office of Management and Budget (OMB) for review.
This final rule is a not significant regulatory action pursuant to E.O. 12866; OMB also has not designated this rule as a
“major rule” as defined by the Congressional Review Act (5 U.S.C. 801 et seq.).

PHMSA has complied with the procedural and analytical requirements in E.O. 12866 as implemented by DOT Order 2100.6B and DOT
Order 2100.7 and determined that this direct final rule may result in minimal cost savings by reducing regulatory burdens
and

regulatory uncertainty for pipeline facility operators. In general, updates to consensus industry standards are widely accepted
and followed on a voluntary basis throughout most of the pipeline industry. PHMSA understands that most pipeline operators
already purchase and voluntarily apply industry standards—including the updated standard that is the subject of this rulemaking—within
their ordinary business practices. Incorporation of the updated version of the standard referenced in this direct final rule
will help ensure that the industry is not forced to incur the additional cost of complying with different versions of the
same standard. The cost savings of this rulemaking could not be quantified.

Updating to a more recent edition of the industry standard will ensure better alignment of PHMSA's regulations with innovations
in operational and maintenance practices, equipment design, and testing. These updates address known safety risks, encourage
facilities to invest in safety enhancing innovations, and improve public safety.

C. Executive Orders 14192 and Executive Order 14219

This direct final rule is considered a deregulatory action pursuant to E.O. 14192, Unleashing Prosperity Through Deregulation. PHMSA estimates that the total costs of the direct final rule on the regulated community will be less than zero. Nor do the
regulatory amendments herein implicate any of the factors identified in section 2(a) of E.O. 14219, Ensuring Lawful Governance and Implementing the President's “Department of Government Efficiency” Deregulatory Initiative, indicative that a regulation is “unlawful . . . [or] that undermine[s] the national interest.”

D. Energy-Related Executive Orders 13211, 14154, and 14156

The President has declared in E.O. 14156, Declaring a National Energy Emergency, a National emergency to address inadequate U.S. energy development production, transportation, refining, and generation capacity.
Similarly, E.O. 14154, Unleashing American Energy, asserts a Federal policy to unleash American energy by ensuing access to abundant supplies of reliable, affordable energy
from (inter alia) the removal of “undue burden[s]” on the identification, development, or use of domestic energy resources
such as PHMSA-jurisdictional gasses and hazardous liquids. PHMSA finds this direct final rule is consistent with each of E.O.
14156 and E.O. 14154. The direct final rule will give affected pipeline operators the benefit of using the updated standard
to maintain or improve public safety, prevent regulatory confusion, and reduce compliance burdens on stakeholders. PHMSA therefore
expects the regulatory amendment in this direct final rule will in turn increase national pipeline transportation capacity
and improve pipeline operators' ability to provide abundant, reliable, affordable natural gas in response to residential,
commercial, and industrial demand.

However, this direct final rule is not a “significant energy action” under E.O. 13211, Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use, which requires Federal agencies to prepare a Statement of Energy Effects for any “significant energy action.” Because this
direct final rule is not a significant action under E.O. 12866, it will not have a significant adverse effect on supply, distribution,
or energy use.

E. Executive Order 13132: Federalism

PHMSA analyzed this direct final rule in accordance with the principles and criteria contained in E.O. 13132, Federalism, and the Presidential Memorandum (“Preemption”) published in the
Federal Register
on May 22, 2009. E.O. 13132 requires agencies to assure meaningful and timely input by State and local officials in the development
of regulatory policies that may have “substantial direct effects on the States, on the relationship between the National Government
and the States, or on the distribution of power and responsibilities among the various levels of government.”

While the direct final rule may operate to preempt some State requirements, it will not impose any regulation that has substantial
direct effects on the States, the relationship between the National Government and the States, or the distribution of power
and responsibilities among the various levels of government. Section 60104(c) of the Federal Pipeline Safety Laws prohibits
certain State safety regulation of interstate pipelines. Under the Federal Pipeline Safety Laws, States that have submitted
a current certification under section 60105(a) can augment Federal pipeline safety requirements for intrastate pipelines regulated
by PHMSA but may not approve safety requirements less stringent than those required by Federal law. A State may also regulate
an intrastate pipeline facility that PHMSA does not regulate. The preemptive effect of the regulatory amendments in this direct
final rule is limited to the minimum level necessary to achieve the objectives of the Federal Pipeline Safety Laws. Therefore,
the consultation and funding requirements of E.O. 13132 do not apply.

F. Regulatory Flexibility Act

The Regulatory Flexibility Act (RFA, 5 U.S.C. 601 et seq.) requires Federal agencies to conduct a Final Regulatory Flexibility Analysis (FRFA) for a final rule subject to notice-and-comment
rulemaking, unless the agency certifies that the rule will not have a significant economic impact on a substantial number
of small entities. The RFA applies only to rules for which an agency is required to first publish a proposed rule (see 5 U.S.C. 603(a) and 604(a)). PHMSA is not required to publish a notice of proposed rulemaking for this DFR, so the RFA does
not apply. However, PHMSA expects no affected operators will face significant costs because the referenced standard is widely
available for purchase at relatively low cost, most operators are already in compliance with the content of the referenced
standard, and compliance costs for any remaining operators are expected to be negligible.

G. Unfunded Mandates Reform Act of 1995

The Unfunded Mandates Reform Act (UMRA, 2 U.S.C. 1501 et seq.) requires agencies to assess the effects of Federal regulatory actions on State, local, and Tribal governments, and the private
sector. For any proposed or direct final rule that includes a Federal mandate that may result in the expenditure by State,
local, and Tribal governments, in the aggregate of $100 million or more in 1996 dollars ($203 million in 2024 dollars) in
any given year, the agency must prepare, amongst other things, a written statement that qualitatively and quantitatively assesses
the costs and benefits of the Federal mandate.

This direct final rule does not impose unfunded mandates under UMRA because it does not result in costs of $100 million or
more (in 1996 dollars) per year for either State, local, or Tribal governments, or to the private sector.

H. National Environmental Policy Act

PHMSA has analyzed this rule pursuant to the National Environmental Policy Act (NEPA, 42 U.S.C. 4321 et seq.) and has determined it is categorically excluded under 23 CFR 771.117(c)(20), which applies to the promulgation of rules,
regulations, and directives. Under section 9 of DOT Order 5610.1D (“DOT's Procedures for Considering Environmental Impacts”),
PHMSA may apply a categorical exclusion established in another Operating Administration's procedures.

PHMSA followed the requirements outlined in DOT Order 5610.1D to apply a categorical exclusion issued by the Federal Highway
Administration (FHWA) to this deregulatory action. PHMSA does not anticipate any adverse environmental impacts from this rule,
and PHMSA has determined no unusual circumstances are present under 23 CFR 771.117(b). PHMSA's Categorical Exclusion Determination
memo for this action is available on PHMSA's website. (2)

I. Executive Order 13175

PHMSA analyzed this direct final rule according to the principles and criteria in E.O. 13175, Consultation and Coordination with Indian Tribal Governments, and DOT Order 5301.1A (“Department of Transportation Tribal Consultation Policies and Procedures”). E.O. 13175 requires agencies
to assure meaningful and timely input from Tribal government representatives in the development of rules that significantly
or uniquely affect Tribal communities by imposing “substantial direct compliance costs” or “substantial direct effects” on
such communities or the relationship or distribution of power between the Federal Government and Tribes.

PHMSA assessed the impact of the direct final rule and determined that it will not significantly or uniquely affect Tribal
communities or Indian Tribal governments. The rulemaking's regulatory amendments have a broad, national scope; therefore,
this direct final rule will not significantly or uniquely affect Tribal communities, much less impose substantial compliance
costs on Native American Tribal governments or mandate Tribal action. For these reasons, PHMSA has concluded that the funding
and consultation requirements of E.O. 13175 and DOT Order 5301.1A do not apply.

J. Paperwork Reduction Act

The Paperwork Reduction Act (44 U.S.C. 3501 et seq.) and its implementing regulations at 5 CFR 1320.8(d) requires that PHMSA provide interested members of the public and affected
agencies with an opportunity to comment on information collection and recordkeeping requests. This rulemaking will not create,
amend, or rescind any existing information collections.

K. Executive Order 13609 and International Trade Analysis

E.O. 13609, Promoting International Regulatory Cooperation, requires agencies to consider whether the impacts associated with significant variations between domestic and international
regulatory approaches are unnecessary or may impair the ability of American business to export and compete internationally.
In meeting shared challenges involving health, safety, labor, security, environmental, and other issues, international regulatory
cooperation can identify approaches that are at least as protective as those that are or would be adopted in the absence of
such cooperation. International regulatory cooperation can also reduce, eliminate, or prevent unnecessary differences in regulatory
requirements.

Similarly, the Trade Agreements Act of 1979 (Pub. L. 96-39), as amended by the Uruguay Round Agreements Act (Pub. L. 103-465),
prohibits Federal agencies from establishing any standards or engaging in related activities that create unnecessary obstacles
to the foreign commerce of the United States. For purposes of these requirements, Federal agencies may participate in the
establishment of international standards, so long as the standards have a legitimate domestic objective, such as providing
for safety, and do not operate to exclude imports that meet this objective. The statute also requires consideration of international
standards and, where appropriate, that they be the basis for U.S. standards.

PHMSA engages with international standards setting bodies to protect the safety of the American public. PHMSA has assessed
the effects of the direct final rule and has determined that its regulatory amendments will not cause unnecessary obstacles
to foreign trade.

L. Cybersecurity and Executive Order 14028

E.O. 14028, Improving the Nation's Cybersecurity, directed the Federal Government to improve its efforts to identify, deter, and respond to “persistent and increasingly sophisticated
malicious cyber campaigns.” PHMSA has considered the effects of the direct final rule and has determined that its regulatory
amendments will not materially affect the cybersecurity risk profile for pipeline facilities.

List of Subjects in 49 CFR Part 192

Incorporation by reference, Natural gas, Pipeline safety.

For the reasons set forth above, PHMSA amends 49 CFR part 192 as follows:

PART 192—TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS

Regulatory Text 1. The authority citation for part 192 continues to read as follows:

Authority:

30 U.S.C. 185(w)(3), 49 U.S.C. 5103, 60101 et seq., and 49 CFR 1.97.

1. In § 192.7, revise paragraph (f)(13) to read as follows:

§ 192.7 What documents are incorporated by reference partly or wholly in this part?

---

(f) * * *

(13) ASTM D2564-20 (Reapproved 2024), Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping
Systems, approved September 1, 2024, (ASTM D2564); IBR approved for § 192.281(b).

---

Issued in Washington, DC, on April 22, 2026, under the authority delegated in 49 CFR 1.97. Paul J. Roberti Administrator. [FR Doc. 2026-08071 Filed 4-23-26; 8:45 am] BILLING CODE 4910-60-P

Footnotes

(1) PHMSA, Periodic Safety: Periodic Standards Update II, 90 FR 40749 (Aug. 21, 2025) (effective Jan. 10, 2026). This direct final rule reflects the list of references as they will
exist after that effective date.

(2) DOT, Implementing Procedures, https://www.phmsa.dot.gov/planning-and-analytics/environmental-analysis-and-compliance/implementing-procedures.

Download File

Download