Tyco Electronics Fined £340k After Worker Hand Injury, Swindon
Summary
HSE prosecuted Tyco Electronics UK Limited for breaching Section 2(1) of the Health and Safety at Work etc. Act 1974 after a worker suffered serious hand injuries while cleaning machinery at the company's Swindon site on 7 March 2023. The employee had manually raised a hydraulic ram and reached into the machine, when the door fell and activated the ram, trapping his limb and causing torn nerves and tendons. Bristol Magistrates' Court imposed a fine of £340,000 plus £5,145 costs on 17 April 2026.
“Workers should ensure that machinery is properly isolated from all sources of power so that it cannot restart during the task.”
Manufacturing companies with similar hydraulic or powered machinery should audit their lock-off and isolation procedures against HSE guidance before cleaning or maintenance tasks. The investigation found not only inadequate equipment isolation but also insufficient information, instruction, and supervision of workers — deficiencies in multiple controls that together enabled this incident. The fine of £340,000 signals the financial stakes for inadequate HSWA compliance.
What changed
Tyco Electronics UK Limited pleaded guilty to breaching Section 2(1) of the Health and Safety at Work etc. Act 1974 at Bristol Magistrates' Court on 17 April 2026. The HSE investigation found the company failed to put suitable measures in place to prevent employees being put at risk while cleaning machinery, and that employees had not been provided with sufficient information, instruction, or adequate training on safe machine cleaning procedures.
Manufacturing companies operating similar machinery with hydraulic or mechanical rams should review their lock-out and isolation procedures. The HSE inspector's statement highlights that workers should ensure machinery is properly isolated from all power sources before cleaning tasks to prevent inadvertent start-up. This prosecution reinforces the regulator's focus on maintenance and cleaning safety standards in manufacturing environments.
Penalties
£340,000 fine plus £5,145 costs
Archived snapshot
Apr 21, 2026GovPing captured this document from the original source. If the source has since changed or been removed, this is the text as it existed at that time.
Manufacturing company fined £340,000 after worker seriously injured while cleaning machinery
Search news
21st April 2026
Press release Prosecution
- Company failed to put suitable measures in place to protect employees.
- Worker suffered long-term damage to his hand following the incident.
- HSE guidance emphasises importance of safe isolation procedures before cleaning machinery.
A manufacturing company has been fined £340,000 after an employee was seriously injured while cleaning machinery at its site in Swindon.
The 42-year-old man had been working a night shift for Tyco Electronics UK Limited at its premises on Faraday Road on 7 March 2023. He had been tasked with cleaning a machine used to manufacture pellets made from a mixture of raw materials. During the cleaning process, the worker manually raised the hydraulic ram inside the machine and opened the door. He then used his left hand to reach into the open space to clean the machine.
The machine mentioned
However, as he withdrew his arm, the door fell at the front of the machine and activated the hydraulic ram, trapping his limb. He managed to pull his arm free, tearing nerves and tendons, before shouting for help.
He required three operations to reattach his fingers and spent ten days in hospital. He attended Southmead Hospital twice weekly for dressing changes and physiotherapy. He continues to experience loss of sensation and movement in his fingers, although he has regained some movement in his thumb.
Close up of the hydraulic ram
An investigation by the Health and Safety Executive (HSE) found that Tyco Electronics UK Limited failed to put suitable and sufficient measures in place to prevent employees from being put at risk while cleaning the machine.
The investigation also identified that employees had not been provided with sufficient information and instruction on how to use and clean the machine safely. Training was found to be inadequate, and employees were not suitably supervised.
HSE guidance on safe use of work equipment highlights the importance of following safe isolation and lock-off procedures before carrying out any maintenance or cleaning work on machinery. Employers must ensure that equipment is properly isolated from all power sources and that systems are regularly monitored and reviewed to prevent inadvertent start-up.
Tyco Electronics UK Limited, of Company Secretariat, Faraday Road, Swindon, pleaded guilty to breaching Section 2(1) of the Health and Safety at Work etc. Act 1974. The company was fined £340,000 and ordered to pay costs of £5,145 at Bristol Magistrates’ Court on 17 April 2026.
After the hearing, HSE Inspector Emma Preston said:
“Machinery accidents during maintenance and cleaning are all too common, often with serious consequences.
“Workers should ensure that machinery is properly isolated from all sources of power so that it cannot restart during the task.
“Incidents like this can and should be prevented by following robust lock-off procedures.”
This prosecution was brought by HSE enforcement lawyer Neenu Bains and supported by paralegal officer Hannah Snelling.
Further information:
- The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We are dedicated to protecting people and places, and helping everyone lead safer and healthier lives.
- More information about the legislation referred to in this case is available.
- Further details on the latest HSE news releases are available.
- Relevant guidance can be found here Safe use of work equipment – HSE and Using work equipment safely – HSE.
- HSE does not pass sentences, set guidelines or collect any fines imposed. Relevant sentencing guidelines must be followed unless the court is satisfied that it would be contrary to the interests of justice to do so. The sentencing guidelines for health and safety offences can be found here.
Categories
Media relations contacts
- 9.00am to 5.00pm Monday to Friday
- Call 0151 922 1221
- Email us at [email protected] Subscribe to our bulletins.
Subscribe
Named provisions
Parties
Related changes
Get daily alerts for UK HSE Prosecutions & Press
Daily digest delivered to your inbox.
Free. Unsubscribe anytime.
About this page
Every important government, regulator, and court update from around the world. One place. Real-time. Free. Our mission
Source document text, dates, docket IDs, and authority are extracted directly from HSE.
The summary, classification, recommended actions, deadlines, and penalty information are AI-generated from the original text and may contain errors. Always verify against the source document.
Classification
Who this affects
Taxonomy
Browse Categories
Get alerts for this source
We'll email you when UK HSE Prosecutions & Press publishes new changes.
Subscribed!
Optional. Filters your digest to exactly the updates that matter to you.