Certain Chassis and Subassemblies From Vietnam: Final Affirmative LTFV Determination

Legal Status This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.

The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to About the Federal Register on NARA's archives.gov.

The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.

Legal Status

Notice

You may be interested in this older document that published on 09/29/2025 View Document

Certain Chassis and Subassemblies Thereof From the Socialist Republic of Vietnam: Final Affirmative Determination of Sales at Less Than Fair Value

A Notice by the International Trade Administration on 04/24/2026

• 1.

1.

• Document Details Published Content - Document Details Agencies Department of Commerce International Trade Administration Agency/Docket Number A-552-849 Document Citation 91 FR 22123 Document Number 2026-08043 Document Type Notice Pages 22123-22125
  (3 pages) Publication Date 04/24/2026 Published Content - Document Details

• PDF Official Content

  • View printed version (PDF) Official Content

• Document Details Published Content - Document Details Agencies Department of Commerce International Trade Administration Agency/Docket Number A-552-849 Document Citation 91 FR 22123 Document Number 2026-08043 Document Type Notice Pages 22123-22125
  (3 pages) Publication Date 04/24/2026 Published Content - Document Details

• Document Dates Published Content - Document Dates Dates Text Applicable April 24, 2026. Published Content - Document Dates

• Table of Contents Enhanced Content - Table of Contents This table of contents is a navigational tool, processed from the
  headings within the legal text of Federal Register documents.
  This repetition of headings to form internal navigation links
  has no substantive legal effect.

  -

  -

  -

  -

  -

  -

  -

  -

  -

  -

  -

  -

  Enhanced Content - Table of Contents

• Related Documents Enhanced Content - Related Documents FederalRegister.gov uses the agency dockets published with the document to display related documents.

| A-552-849
(4 Documents) |
| --- |
| Date | | Action | Title |
| | 2026-04-24 | | Certain Chassis and Subassemblies Thereof From the Socialist Republic of Vietnam: Final Affirmative Determination of Sales at Less Than Fair Value |
| | 2025-09-29 | | Certain Chassis and Subassemblies Thereof From the Socialist Republic of Vietnam: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures |
| View More Docket Documents |

Enhanced Content - Related Documents

• Public Comments Enhanced Content - Public Comments This feature is not available for this document.

Enhanced Content - Public Comments
- Regulations.gov Data Enhanced Content - Regulations.gov Data Additional information is not currently available for this document.

Enhanced Content - Regulations.gov Data

- Sharing Enhanced Content - Sharing Shorter Document URL https://www.federalregister.gov/d/2026-08043 Email Email this document to a friend Enhanced Content - Sharing

• Print Enhanced Content - Print
  • Enhanced Content - Print
• Other Formats Enhanced Content - Other Formats This document is also available in the following formats:

JSON Normalized attributes and metadata XML Original full text XML MODS Government Publishing Office metadata More information and documentation can be found in our developer tools pages.

Enhanced Content - Other Formats
- Public Inspection Public Inspection This PDF is FR Doc. 2026-08043 as it appeared on Public Inspection on
04/23/2026 at 8:45 am.

It was viewed
9
times while on Public Inspection.

If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507. Learn more here.

Public Inspection
Published Document: 2026-08043 (91 FR 22123) This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Document Headings Document headings vary by document type but may contain
the following:

1. the agency or agencies that issued and signed a document
2. the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to
3. the agency docket number / agency internal file number
4. the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details.

Department of Commerce

International Trade Administration

1. [A-552-849]

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The U.S. Department of Commerce (Commerce) determines that certain chassis and subassemblies thereof (chassis) from the Socialist Republic of Vietnam (Vietnam) are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is July 1, 2024, through December 31, 2024.

DATES:

Applicable April 24, 2026.

FOR FURTHER INFORMATION CONTACT:

Elizabeth Beuley or Benito Ballesteros, AD/CVD Operations, Office IX, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-3269 or (202) 482-7425, respectively.

SUPPLEMENTARY INFORMATION:

Background

On September 29, 2025, Commerce published the Preliminary Determination in this investigation and invited interested parties to comment. ] Due to the lapse in appropriations and Federal Government shutdown, on November 14, 2025, Commerce tolled all deadlines in administrative proceedings by 47 days. ] Additionally, due to a backlog of documents that were electronically filed via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS) during the Federal Government shutdown, on November 24, 2025, Commerce tolled all deadlines in administrative proceedings by an additional 21 days. ] Accordingly, the deadline for this final determination is now April 20, 2026.

For a complete description of the events that occurred since the Preliminary Determination, see the Issues and Decision Memorandum. ] The Issues and Decision Memorandum is a public document and is on file electronically via ACCESS. ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/​frnotices.

Scope of the Investigation

The products covered by this investigation are chassis from Vietnam. For a complete description of the scope of this investigation, see Appendix I.

Scope Comments

During the course of this investigation, Commerce received scope comments from interested parties. Commerce issued a Preliminary Scope Decision Memorandum to address these comments and set aside a period of time for parties to address scope issues in scope-specific case and rebuttal briefs. ] Between August and September 2025, Commerce received scope case and rebuttal briefs from interested parties. ] On February 10, 2026, the petitioner requested a scope exclusion. ] After analyzing these comments, we made changes to the scope of the investigation published in the Preliminary Determination, as noted in Appendix I. ]

Verification

Commerce conducted verification of the information relied upon in making its final determination in this investigation, as provided in section 782(i) of the Tariff Act of 1930, as amended (the Act). Specifically, in December 2025, we conducted on-site verification of the data reported by Thaco Special Vehicles Manufacturing Limited Company and Thaco Industries Trailers and Heavy Steel Structures Manufacturing Limited Liability Company (collectively, Thaco), using standard verification procedures, ( printed page 22124) including an examination of relevant sales and accounting records. ]

Analysis of Comments Received

The issues raised in the case and rebuttal briefs by interested parties in this investigation are discussed in the Issues and Decision Memorandum. For a list of the issues addressed in the Issues and Decision Memorandum, see Appendix II.

Changes Since the Preliminary Determination

Based on our review and analysis of the comments received from interested parties, we made certain changes to the margin calculations for Thaco. For a discussion of these changes, see the Issues and Decision Memorandum.

Separate Rates and the Vietnam-Wide Entity

No party commented on Commerce's preliminary separate rate determination for Thaco. Accordingly, we continue to find that Thaco is eligible for a separate rate. Additionally, because we preliminarily did not find that the Vietnam-wide entity failed to cooperate in this investigation, we assigned the estimated weighted-average dumping margin calculated for Thaco as the estimated weighted-average dumping margin for the Vietnam-wide entity. No party commented on our preliminary finding with respect to the Vietnam-wide entity. Therefore, we continue to assign the estimated weighted-average dumping margin calculated for Thaco to the Vietnam-wide entity.

Combination Rates

Consistent with the Initiation Notice, ] the Preliminary Determination, and Policy Bulletin 05.1, ] Commerce calculated a combination rate for Thaco, which is the sole respondent eligible for a separate rate in this investigation.

Final Determination

Commerce determines that the following estimated weighted-average dumping margins exist for the period July 1, 2024, through December 31, 2024:

| Producer | Exporter | Weighted-average dumping margin
(percent) |
| --- | --- | --- |
| Thaco Special Vehicles Manufacturing Limited Company; Thaco Industries Trailers and Heavy Steel Structures Manufacturing Limited Liability Company | Thaco Special Vehicles Manufacturing Limited Company; Thaco Industries Trailers and Heavy Steel Structures Manufacturing Limited Liability Company | 186.84 |
| Vietnam-wide Entity | 186.84 | |

Disclosure

Commerce intends to disclose the calculations and analysis performed in this final determination to interested parties within five days of any public announcement or, if there is no public announcement, within five days of the date of publication of this notice, in accordance with 19 CFR 351.224(b).

Suspension of Liquidation

In accordance with section 733(d)(1)(B) of the Act, we will instruct U.S. Customs and Border Protection (CBP) to suspend liquidation of all entries of subject merchandise, as described in Appendix I of this notice, which were entered, or withdrawn from warehouse, for consumption, on or after September 29, 2025, the date of publication of the Preliminary Determination in the Federal Register. In accordance with section 733(d) of the Act, we instructed CBP to discontinue the suspension of liquidation of all entries of subject merchandise entered or withdrawn from warehouse, on or after March 28, 2026, but to continue the suspension of liquidation of all entries of subject merchandise on or before March 27, 2026.

If the U.S. International Trade Commission (ITC) issues a final affirmative injury determination, we will issue an antidumping duty order, reinstate the suspension of liquidation under section 736(a) of the Act, and require a cash deposit of estimated antidumping duties for such entries of subject merchandise in the amounts indicated above, in accordance with section 736(a) of the Act, as follows: (1) the cash deposit rate for the producer/exporter combination listed in the table above will be the rate identified in the table; (2) for all combinations of Vietnamese producers/exporters of subject merchandise that have not established eligibility for their own separate rates, the cash deposit rate will be the rate established for the Vietnam-wide entity; and (3) for all third country exporters of subject merchandise not listed in the table above, the cash deposit rate will be the cash deposit rate applicable to the Vietnamese producer/exporter combination (or Vietnam-wide entity) that supplied that third-country exporter.

If the ITC determines that material injury, or threat of material injury, does not exist, this proceeding will be terminated, and all estimated duties deposited or securities posted as a result of the suspension of liquidation will be refunded or canceled.

ITC Notification

In accordance with section 735(d) of the Act, we will notify the ITC of our final affirmative determination of sales at LTFV. Because the final determination in this investigation is affirmative, in accordance with section 735(b)(2) of the Act, the ITC will make its final determination as to whether the domestic industry in the United States is materially injured or threatened with material injury by reason of imports of chassis from Vietnam no later than 45 days after our final determination. If the ITC determines that such material injury or threat of material injury does not exist, this proceeding will be terminated, all cash deposits posted will be refunded, and suspension of liquidation will be lifted. If the ITC determines that such injury does exist, Commerce will issue an antidumping duty order directing CBP to assess, upon further instruction by Commerce, antidumping duties on all imports of the subject merchandise entered or withdrawn from warehouse for consumption on or after the effective ( printed page 22125) date of the suspension of liquidation, as discussed in the “Continuation of Suspension of Liquidation” section.

Administrative Protective Order (APO)

This notice also serves as a final reminder to parties subject to APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.

Notification to Interested Parties

This determination is issued and published in accordance with sections 735(d) and 777(i)(1) of the Act, and 19 CFR 351.210(c).

Dated: April 20, 2026.

Christopher Abbott,

Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

The merchandise covered by this investigation consists of chassis and subassemblies thereof whether finished or unfinished, whether assembled or unassembled, whether coated or uncoated, regardless of the number of axles, for carriage of containers, or other payloads (including self-supporting payloads) for road, marine roll-on/roll-off (RORO) and/or rail transport. Chassis are typically, but are not limited to, rectangular framed trailers with a suspension and axle system, wheels and tires, brakes, a lighting and electrical system, a coupling for towing behind a truck tractor, and a locking system or systems to secure the shipping container or containers to the chassis using twistlocks, slide pins or similar attachment devices to engage the corner fittings on the container or other payload.

Subject merchandise includes, but is not limited to, the following subassemblies:

• Chassis frames, or sections of chassis frames, including kingpin assemblies, bolsters consisting of transverse beams with locking or support mechanisms, goosenecks, drop assemblies, extension mechanisms and/or rear impact guards;
• Running gear assemblies or axle assemblies for connection to the chassis frame, whether fixed in nature or capable of sliding fore and aft or lifting up and lowering down, which may or may not include suspension(s) (mechanical or pneumatic), wheel end components, slack adjusters, dressed axles, brake chambers, locking pins, and tires and wheels; and
• Assemblies that connect to the chassis frame or a section of the chassis frame, such as but not limited to, pintle hooks or B-trains (which include a fifth wheel), which are capable of connecting a chassis to a converter dolly or another chassis. Importation of any of these subassemblies, whether assembled or unassembled, constitutes an unfinished chassis for purposes of this investigation.

Subject merchandise also includes chassis, whether finished or unfinished, entered with components such as, but not limited to: hub and drum assemblies, brake assemblies (either drum or disc), bare axles, brake chambers, suspensions and suspension components, wheel end components, landing gear legs, spoke or disc wheels, tires, brake control systems, electrical harnesses and lighting systems.

Processing of finished and unfinished chassis and components such as trimming, cutting, grinding, notching, punching, drilling, painting, coating, staining, finishing, assembly, or any other processing either in the country of manufacture of the in-scope product or in a third country does not remove the product from the scope. Inclusion of other components not identified as comprising the finished or unfinished chassis does not remove the product from the scope.

Individual components entered and sold by themselves are not subject to the investigation, but components entered with a finished or unfinished chassis are subject merchandise. A finished chassis is ultimately comprised of several different types of subassemblies. Within each subassembly there are numerous components that comprise a given subassembly.

This scope excludes dry van trailers, refrigerated van trailers and flatbed trailers. Dry van trailers are trailers with a wholly enclosed cargo space comprised of fixed sides, nose, floor and roof, with articulated panels (doors) across the rear and occasionally at selected places on the sides, with the cargo space being permanently incorporated in the trailer itself. Refrigerated van trailers are trailers with a wholly enclosed cargo space comprised of fixed sides, nose, floor and roof, with articulated panels (doors) across the rear and occasionally at selected places on the sides, with the cargo space being permanently incorporated in the trailer and being insulated, possessing specific thermal properties intended for use with self-contained refrigeration systems. Flatbed (or platform) trailers consist of load carrying main frames and a solid, flat or stepped loading deck or floor permanently incorporated with and supported by frame rails and cross members.

The scope also excludes fully and permanently assembled trailers that have permanently incorporated floors welded to the frame without a locking mechanism, a gross axle weight ratings of 8,000 lbs or less, and that connect to Federal Highway Administration Class 3 or Class 5 vehicles with a coupler rated for SAE J684 Standard Class 4, whether entered with or without neck, ramp, dove tail, or dump/safety arm components. The scope also excludes fully dressed axle subassemblies with a gross axle weight rating of 8,000 lbs or less, an outer diameter of the axle beam of three inches or less, and eight or fewer lug nuts.

The finished and unfinished chassis subject to this investigation are typically classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheadings: 8716.39.0090 and 8716.90.5060. Imports of finished and unfinished chassis may also enter under HTSUS subheading 8716.90.5010. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise under investigation is dispositive.

Appendix II

List of Topics Discussed in the Issues and Decision Memorandum

I. Summary

II. Background

III. Changes Since the Preliminary Determination

IV. Discussion of the Issues

Comment 1: Whether to Change the Harmonized Tarriff Schedule (HTS) Classification of Certain Surrogate Values (SVs)

Comment 2: Whether to Revise the Surrogate Financial Ratio Calculation

Comment 3: Whether to Adjust the Ocean Freight SV

V. Recommendation

Footnotes

1. See Certain Chassis and Subassemblies Thereof from the Socialist Republic of Vietnam: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures, 90 FR 46561 (September 29, 2025) (Preliminary Determination), and accompanying Preliminary Determination Memorandum.

2.

 
See
Memorandum, “Deadlines Affected by the Shutdown of the Federal Government,” dated November 14, 2025.

3.

 
See
Memorandum, “Tolling of all Case Deadlines,” dated November 24, 2025.

4.

 
See
Memorandum, “Issues and Decision Memorandum for the Final Affirmative Determination in the Less-Than-Fair-Value Investigation of Certain Chassis and Subassemblies Thereof from the Socialist Republic of Vietnam,” dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum).

5.

 
See
Memorandum, “Less Than Fair Value and Countervailing Duty Investigations of Certain Chassis and Subassemblies Thereof from Mexico, Thailand, and the Socialist Republic of Vietnam: Preliminary Scope Decision Memorandum,” dated July 28, 2025 (Preliminary Scope Decision Memorandum).

6.

 
See
PJ Trailers Seminole Inc.'s Letter, “PJ Trailers Seminole Inc.'s Scope Case Brief,” dated August 27, 2025; see also Hyundai de Mexico S.A. de C.V.'s Letter, “HT's Scope Case Brief,” dated August 27, 2025; and Petitioner's Letter, “Scope Rebuttal Brief,” dated September 5, 2025.

7.

 
See
Petitioner's Letter, “Request Scope Exclusion,” dated February 10, 2026.

8.

 
See
Memorandum, “Less Than Fair Value and Countervailing Duty Investigations of Certain Chassis and Subassemblies Thereof from Mexico, Thailand, and the Socialist Republic of Vietnam: Final Scope Decision Memorandum,” dated concurrently with this notice.

9.

 
See
Memorandum, “Verification of the Questionnaire Responses of Thaco Special Vehicles Manufacturing Limited Company and Thaco Industries Trailers and Heavy Steel Structures Manufacturing Limited Liability Company,” dated February 24, 2026.

1. See Certain Chassis and Subassemblies Thereof from Mexico, Thailand, and the Socialist Republic of Vietnam: Initiation of Less-Than-Fair-Value Investigations, 90 FR 13457 (March 24, 2025) (Initiation Notice).

11.

 
See
Enforcement and Compliance's Policy Bulletin No. 05.1, regarding, “Separate-Rates Practice and Application of Combination Rates in Antidumping Investigations involving Non-Market Economy Countries,” dated April 5, 2005 (Policy Bulletin 05.1), available on Commerce's website at https://enforcement.trade.gov/​policy/​bull05-1.pdf.

[FR Doc. 2026-08043 Filed 4-23-26; 8:45 am]

BILLING CODE 3510-DS-P

Published Document: 2026-08043 (91 FR 22123)