Changeflow GovPing Government General Rover Mobile X-Ray System Class II Recall, 32 U...
Urgent Enforcement Amended Final

Rover Mobile X-Ray System Class II Recall, 32 Units

Favicon for changeflow.com FDA Device Recalls (Class II)
Filed
Detected
Email

Summary

Micro-X Ltd. initiated a Class II recall for its Rover Mobile X-Ray System (Models MXU-RV35 and MXU-RV71) on March 27, 2026, after determining that the X-ray generator may malfunction, rendering the system inoperable. The FDA attributed the cause to component design or selection. The recall affects 32 units distributed across Washington, New Jersey, California, and Puerto Rico. The firm issued an Urgent Medical Device Correction Notification requiring consignees to contact their service representative to arrange PCBA replacement, avoid fully discharging batteries to minimize failure risk, and report any system errors or abnormal behaviors promptly.

“X-Ray generator may malfunction resulting in the X-Ray being inoperable.”

FDA , verbatim from source
Published by FDA on accessdata.fda.gov . Detected, standardized, and enriched by GovPing. Review our methodology and editorial standards .

About this source

GovPing monitors FDA Device Recalls (Class II) for new government general regulatory changes. Every update since tracking began is archived, classified, and available as free RSS or email alerts — 89 changes logged to date.

What changed

Micro-X Ltd. initiated a Class II medical device recall for its Rover Mobile X-Ray System after identifying that the X-ray generator may malfunction due to component design issues, potentially rendering the device inoperable. The recall covers 32 units distributed under catalog numbers MXU-RV35 and MXU-RV71, with affected serial numbers listed by UDI. The firm is notifying consignees via Urgent Medical Device Correction Notification and is requesting that affected healthcare facilities contact their local service representative to schedule PCBA replacement at the next preventive maintenance visit, while also advising against allowing batteries to fully discharge as a interim risk-mitigation measure.

Healthcare facilities that have received or distributed these mobile X-ray systems should immediately forward the notification to all affected departments, complete and return the Customer Response Form to Micro-X, and contact their service representative to schedule the component replacement. While the firm notes devices may continue to be used in the interim, any system errors or abnormal behaviors must be reported without delay, and facilities should monitor for follow-up communications as the recall remains open.

What to do next

  1. Contact your local service representative to arrange replacement of the PCBA with the updated version at the next scheduled visit or Preventative Maintenance.
  2. To minimize the likelihood of system failure, the batteries should not be permitted to fully discharge.
  3. Any system errors or abnormal behaviours must be reported to your authorised service provider without delay.
  4. Please complete and email the Customer Response Form in Appendix 1 to the Micro-X LTD in Australia: djerkovic@micro-x.com and copy support@micro-x.com

Archived snapshot

Apr 24, 2026

GovPing captured this document from the original source. If the source has since changed or been removed, this is the text as it existed at that time.

Class 2 Device Recall Rover Mobile XRay System

- Databases

| |

| 510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards |

| CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC | |

| New Search | ) |

| | Class 2 Device Recall Rover Mobile XRay System | |

Date Initiated by Firm March 27, 2026
Date Posted April 22, 2026
Recall Status Open , Classified
Recall Number Z-1918-2026
Recall Event ID 98644
510(K)Number K211423
Product Classification System, x-ray, mobile - Product Code IZL
Product Rover Mobile X-ray System
Model/Catalog Number: MXU-RV35 and MXU-RV71
Code Information Lot Code: Refer to product traceability spreadsheet provided

MXU-RV71 UDI: (01)09357123000051/ Serial Numbers: 334 397 399 408 423 425 459

MXU-RV35 UDI: (01)09357123000037/ Serial Numbers: 269 223 349 348 351 363 388 384 391 359 416 419 428 429 430 431 435 434 436 413 437 438 460 461 462 |
| FEI Number | 3012855798 |
| Recalling Firm/
Manufacturer | Micro-X Ltd.
Unit 14 6 Mab Eastern Promenade
Tonsley Australia |
| For Additional Information Contact | 206-2498764 |
| Manufacturer Reason
for Recall | X-Ray generator may malfunction resulting in the X-Ray being inoperable. |
| FDA Determined
Cause | Component design/selection |
| Action | On March 27, 2026, Micro-X issued a Urgent: Medical Device Correction Notification, via E-Mail. Micro-X ask consignees to take the following actions:

" Contact your local service representative to arrange replacement of the PCBA with the updated version at the next scheduled visit or Preventative Maintenance. In the interim, customers may continue to use the device.
" To minimize the likelihood of system failure, the batteries should not be permitted to fully discharge. Any system errors or abnormal behaviours must be reported to your authorised service provider without delay.
" If the product has been further distributed to other facilities, please ensure this notice is immediately shared with them.
" Please complete and email the Customer Response Form in Appendix 1 to the Micro-X LTD in Australia: djerkovic@micro-x.com and copy support@micro-x.com Completing this form confirms receipt of this notice, understanding of the issue, and the necessary actions to be taken. |
| Quantity in Commerce | 32 units |
| Distribution | US Nationwide distribution in the states and territories of WA, NJ, CA, Puerto Rico. |
| Total Product Life Cycle | TPLC Device Report |

| 1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
3 The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes. | |

| 510(K) Database | 510(K)s with Product Code = IZL |

Get daily alerts for FDA Device Recalls (Class II)

Daily digest delivered to your inbox.

Free. Unsubscribe anytime.

About this page

What is GovPing?

Every important government, regulator, and court update from around the world. One place. Real-time. Free. Our mission

What's from the agency?

Source document text, dates, docket IDs, and authority are extracted directly from FDA.

What's AI-generated?

The summary, classification, recommended actions, deadlines, and penalty information are AI-generated from the original text and may contain errors. Always verify against the source document.

Last updated

Classification

Agency
FDA
Filed
March 27th, 2026
Instrument
Enforcement
Branch
Executive
Legal weight
Binding
Stage
Final
Change scope
Substantive

Who this affects

Applies to
Healthcare providers Medical device makers
Industry sector
3345 Medical Device Manufacturing
Activity scope
Medical device recall response Component replacement X-ray equipment servicing
Geographic scope
United States US

Taxonomy

Primary area
Medical Devices
Operational domain
Clinical Operations
Compliance frameworks
GxP
Topics
Public Health Product Safety

Get alerts for this source

We'll email you when FDA Device Recalls (Class II) publishes new changes.

Free. Unsubscribe anytime.

You're subscribed!