Aero-Tech Light Bulb Co. seeks small business exemption for energy conservation standards

Legal Status This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.

The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to About the Federal Register on NARA's archives.gov.

The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.

Legal Status

Notice

Energy Conservation Program: Notice of Application From Aero-Tech Light Bulb Co. for a Small Business Exemption From the Department of Energy's Rough Service Lamps Energy Conservation Standards

A Notice by the Energy Efficiency and Renewable Energy Office on 10/15/2018

• 1.

1.

• Document Details Published Content - Document Details Agencies Department of Energy Energy Efficiency and Renewable Energy Agency/Docket Number Case Number 2018-001 Document Citation 83 FR 51931 Document Number 2018-22373 Document Type Notice Pages 51931-51933
  (3 pages) Publication Date 10/15/2018 Published Content - Document Details

• PDF Official Content

  • View printed version (PDF) Official Content

• Document Details Published Content - Document Details Agencies Department of Energy Energy Efficiency and Renewable Energy Agency/Docket Number Case Number 2018-001 Document Citation 83 FR 51931 Document Number 2018-22373 Document Type Notice Pages 51931-51933
  (3 pages) Publication Date 10/15/2018 Published Content - Document Details

• Document Dates Published Content - Document Dates Comments Close 12/14/2018 Dates Text Written comments and information are requested and will be accepted on or before December 14, 2018. Published Content - Document Dates

• Table of Contents Enhanced Content - Table of Contents This table of contents is a navigational tool, processed from the
  headings within the legal text of Federal Register documents.
  This repetition of headings to form internal navigation links
  has no substantive legal effect.

  • AGENCY:
  • ACTION:
  • SUMMARY:
  • DATES:
  • ADDRESSES:
  • FOR FURTHER INFORMATION CONTACT:
  • SUPPLEMENTARY INFORMATION:
  • I. Background and Authority
  • II. Aero-Tech Application for a Small Business Exemption
  • III. Consultations With Other Agencies
  • IV. Request for Comments
  • Footnotes Enhanced Content - Table of Contents

• Related Documents Enhanced Content - Related Documents FederalRegister.gov uses the agency dockets published with the document to display related documents.

| Case Number 2018-001
(3 Documents) | | | |
| --- | | | |
| Date | | Action | Title |
| | 2019-01-30 | Notice of decision and order. | Energy Conservation Program: Notice of Decision and Order Denying an Exemption to Aero-Tech Light Bulb Co. From the Department of Energy Rough Service Lamps Energy Conservation Standards |
| | 2018-10-23 | Notice of decision and order. | Energy Conservation Program: Decision and Order Granting a Waiver to HH Technologies From the Department of Energy Walk-in Cooler and Walk-in Freezer Doors Test Procedure |
| | 2018-10-15 | Notice of application for a small business exemption and request for public comment. | Energy Conservation Program: Notice of Application From Aero-Tech Light Bulb Co. for a Small Business Exemption From the Department of Energy's Rough Service Lamps Energy Conservation Standards |

Enhanced Content - Related Documents

• Public Comments Enhanced Content - Public Comments Comments are no longer being accepted. See DATES for details.

1 comment has
been received at Regulations.gov.

Agencies review all submissions and may choose to redact, or withhold,
certain submissions (or portions thereof). Submitted comments may not be
available to be read until the agency has approved them.

Docket Title	Document ID	Comments
Small Business Exemption - Aero-Tech Light Bulb Co. (Case No. 2018-001)	EERE-2018-BT-PET-0016-0001	1

Enhanced Content - Public Comments
- Regulations.gov Data Enhanced Content - Regulations.gov Data

FederalRegister.gov retrieves relevant information about this document
from Regulations.gov to provide users with additional context. This
information is not part of the official Federal Register document.

Small Business Exemption - Aero-Tech Light Bulb Co. (Case No. 2018-001)

Docket ID EERE-2018-BT-PET-0016 Supporting Documents No supporting documents available Enhanced Content - Regulations.gov Data

- Sharing Enhanced Content - Sharing Shorter Document URL https://www.federalregister.gov/d/2018-22373 Email Email this document to a friend Enhanced Content - Sharing

• Print Enhanced Content - Print
  • Print this document Enhanced Content - Print
• Document Statistics Enhanced Content - Document Statistics Document page views are updated periodically throughout the day and are cumulative counts for this document. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.

Page views 158
as of
03/14/2026 at 4:15 pm EDT Enhanced Content - Document Statistics
- Other Formats Enhanced Content - Other Formats This document is also available in the following formats:

JSON Normalized attributes and metadata XML Original full text XML MODS Government Publishing Office metadata More information and documentation can be found in our developer tools pages.

Enhanced Content - Other Formats
- Public Inspection Public Inspection This PDF is FR Doc. 2018-22373 as it appeared on Public Inspection on
10/12/2018 at 8:45 am.

If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507. Learn more here.

Public Inspection
Published Document: 2018-22373 (83 FR 51931) This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Document Headings Document headings vary by document type but may contain
the following:

1. the agency or agencies that issued and signed a document
2. the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to
3. the agency docket number / agency internal file number
4. the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details.

Department of Energy

Energy Efficiency and Renewable Energy

1. [Case Number 2018-001]

AGENCY:

Office of Energy Efficiency and Renewable Energy, Department of Energy.

ACTION:

Notice of application for a small business exemption and request for public comment.

SUMMARY:

This notice announces the receipt of and publishes an application for a small business exemption submitted by Aero-Tech Light Bulb Co. (Aero-Tech) requesting an exemption from the U.S. Department of Energy (DOE) rough service lamp energy conservation standards. Specifically, the application requests a two-year exemption from compliance with the standards beginning on January 25, 2018, the compliance date for the standards. DOE is publishing the non-confidential portion of Aero-Tech's application and soliciting comments, data, and information concerning the application.

DATES:

Written comments and information are requested and will be accepted on or before December 14, 2018.

ADDRESSES:

Interested persons are encouraged to submit comments using the Federal eRulemaking Portal at http://www.regulations.gov. Alternatively, interested persons may submit comments, identified by Case Number “2018-001,” by any of the following methods:

• Federal eRulemaking Portal: http://www.regulations.gov. Follow the instructions for submitting comments.
• Email: AeroTech2018PET0016@ee.doe.gov Include Case No. 2018-001 in the subject line of the message.
• Postal Mail: Dr. Stephanie Johnson, U.S. Department of Energy, Building Technologies Office, Mailstop EE-5B, Small Business Exemption Case No. 2018-001, 1000 Independence Avenue SW, Washington, DC 20585-0121. If possible, please submit all items on a compact disc (CD), in which case it is not necessary to include printed copies.
• Hand Delivery/Courier: Appliance and Equipment Standards Program, U.S. Department of Energy, Building Technologies Office, 950 L'Enfant Plaza SW, 6th Floor, Washington, DC 20024. If possible, please submit all items on a CD, in which case it is not necessary to include printed copies. No telefacsimilies (faxes) will be accepted. For detailed instructions on submitting comments and additional information on this process, see section IV of this document.

Docket: The docket, which includes Federal Register notices, comments, and other supporting documents/materials, is available for review at https://www.regulations.gov. All documents in the docket are listed in the https://www.regulations.gov index. However, some documents listed in the index, such as those containing information that is exempt from public disclosure, may not be publicly available.

The docket web page can be found at http://www.regulations.gov/​docket?​D=​EERE-2018-BT-PET-0016. The docket web page contains simple instruction on how to access all documents, including public comments, in the docket. See section IV for information on how to submit comments through http://www.regulations.gov.

FOR FURTHER INFORMATION CONTACT:

Dr. Stephanie Johnson, U.S. Department of Energy, Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue SW, Washington, DC 20585-0121. Telephone: (202) 287-1943. Email: AeroTech2018PET0016@ee.doe.gov.

Ms. Celia Sher, U.S. Department of Energy, Office of the General Counsel, Mail Stop GC-33, Forrestal Building, 1000 Independence Avenue SW, Washington, DC 20585-0103. Telephone: (202) 287-6122. Email: Celia.Sher@hq.doe.gov.

SUPPLEMENTARY INFORMATION:

I. Background and Authority

The Energy Policy and Conservation Act of 1975 (EPCA), [1 ] Public Law 94-163 (42 U.S.C. 6291-6317, as codified), among other things, authorizes the U.S. Department of Energy (DOE) to regulate the energy efficiency of a number of consumer products and industrial equipment. Title III, Part B [2 ] of EPCA established the Energy Conservation Program for Consumer Products Other Than Automobiles, which sets forth a variety of provisions designed to improve energy efficiency for certain types of consumer products. These products include rough service lamps, the focus of this document (42 U.S.C. 6295(l)(4)(A)).

Under EPCA, DOE's energy conservation program consists essentially of four parts: (1) Testing, (2) labeling, (3) Federal energy conservation standards, and (4) certification and enforcement procedures. Relevant provisions of EPCA include definitions (42 U.S.C. 6291), energy conservation standards (42 U.S.C. 6295), test procedures (42 U.S.C. 6293), labeling provisions (42 U.S.C. 6294), and the authority to require information and reports from manufacturers (42 U.S.C. 6296).

Pursuant to 42 U.S.C. 6295(l)(4), DOE is required to collect unit sales data for calendar years 2010 through 2025, in consultation with the National Electrical Manufacturers Association (NEMA), for rough service, shatter-resistant, 3-way incandescent lamps, 2,601-3,300 lumen general service incandescent lamps, and vibration service lamps. For each of these five lamp types, DOE, in consultation with NEMA, must also construct a model based on coincident economic indicators that closely match the historical annual growth rates of each lamp type to provide a neutral comparison benchmark estimate of future unit sales (42 U.S.C. 6295(l)(4)(B). Section 321(a)(3)(B) of the Energy Independence and Security Act of 2007 (EISA 2007) in part amends paragraph 325(l) of EPCA by adding paragraphs (4)(D) through (H), which direct DOE to initiate an accelerated rulemaking to establish an energy conservation standard for these lamps if the actual annual unit sales of any of the lamp types in any year between 2010 and 2025 exceed the benchmark estimate of unit sales by at least 100 percent (i.e., are greater than 200 percent of the anticipated sales) (42 U.S.C. 6295(l)(4)(D)-(H)). If the Secretary of Energy (Secretary) does not complete the accelerated rulemakings within one year from the end of the previous calendar year during which predicted sales were exceeded, there is a “backstop requirement” for each lamp type, which would establish, by statute, energy conservation standard levels and related requirements. Id.

DOE published a notice of data availability in April 2016, which indicated that the shipments of vibration service lamps were over 7 million units in 2015. 81 FR 20261, 20263 (April 7, 2016; April 2016 NODA). This equates to 272.5 percent of the benchmark estimate, which was 2,594,000 units. Id. Therefore, vibration service lamps exceeded the statutory ( printed page 51932) threshold for the first time, thus triggering an accelerated rulemaking to be completed no later than December 31, 2016. Id.

Furthermore, NEMA submitted revised data for rough service lamps following the publication of the April 2016 NODA. The revised data showed sales of 10,914,000 rough service lamps in 2015, which exceeded 100% of the benchmark estimate of 4,967,000 units for 2015. This resulted in a requirement for DOE to initiate an accelerated rulemaking for rough service lamps. In an October 2016 notice of proposed definition and data availability, DOE indicated it must conduct an energy conservation standards rulemaking for rough service lamps to be completed no later than the end of the 2016 calendar year. 81 FR 71794, 71800 (Oct. 18, 2016).

Since unit sales for vibration service lamps and rough service lamps exceeded 200 percent of the benchmark estimates in 2015, and DOE did not complete an energy conservation standards rulemaking for these lamps by the end of calendar year 2016, the backstop requirements were triggered.

For rough service lamps, the backstop requires the lamps to: (1) Have a shatter-proof coating or equivalent technology that complies with NSF/ANSI 51 and is designed to contain the glass if the glass envelope of the lamp is broken and to provide effective containment over the life of the lamp; (2) have a maximum 40-watt limitation; and (3) be sold at retail only in a package containing one lamp (42 U.S.C. 6295(l)(4)(D)(ii)). DOE codified this statutory backstop requirement at 10 CFR 430.32(bb), which became effective January 25, 2018. 82 FR 60845 (Dec. 26, 2017).

II. Aero-Tech Application for a Small Business Exemption

Aero-Tech submitted an application, pursuant to Subpart E of 10 CFR part 430, requesting a two-year small business exemption from the DOE rough service lamps energy conservation standards found in 10 CFR 430.32(bb). Aero-Tech is asking for an exemption from the standards on the basis of its status as a small business. According to Aero-tech, failure to receive a small business exemption would likely result in a lessening of competition in the market for lighting companies.

Under 42 U.S.C. 6295(t), DOE may grant a temporary exemption from an applicable energy conservation standard to a manufacturer if DOE finds that the annual gross revenues of such manufacturer from all its operations (including the manufacture and sale of covered products) does not exceed $8,000,000 for the 12-month period preceding the date of the application. In making this finding, DOE must account for the annual gross revenues of any other person who controls, is controlled by, or is under common control with, such manufacturer (42 U.S.C. 6295(t)(1)). The Secretary may not grant an exemption with respect to any type (or class) of covered product subject to an energy conservation standard unless the Secretary finds, after obtaining the written views of the Attorney General, that a failure to allow an exemption would likely result in a lessening of competition. (42 U.S.C. 6295(t)(2)) See also, subpart E of 10 CFR part 430.

III. Consultations With Other Agencies

The notice of Aero-Tech's application for exemption will be transmitted to the Attorney General by the Secretary along with: (a) A statement of the facts and of the reasons for the exemption, and (b) copies of all documents submitted. 10 CFR 430.54.

IV. Request for Comments

Through this notice, DOE announces receipt of Aero-Tech's application for a small business exemption from the rough service lamps energy conservation standards found in 10 CFR 430.32(bb), pursuant to Subpart E of 10 CFR part 430. DOE is publishing the non-confidential portion of Aero-Tech's application in this notice. DOE invites all interested parties to submit in writing by December 14, 2018, comments and information on all aspects of the application.

Submitting comments via http://www.regulations.gov. The http://www.regulations.gov web page will require you to provide your name and contact information. Your contact information will be viewable to DOE Building Technologies staff only. Your contact information will not be publicly viewable except for your first and last names, organization name (if any), and submitter representative name (if any). If your comment is not processed properly because of technical difficulties, DOE will use this information to contact you. If DOE cannot read your comment due to technical difficulties and cannot contact you for clarification, DOE may not be able to consider your comment.

However, your contact information will be publicly viewable if you include it in the comment or in any documents attached to your comment. Any information that you do not want to be publicly viewable should not be included in your comment, nor in any document attached to your comment. Persons viewing comments will see only first and last names, organization names, correspondence containing comments, and any documents submitted with the comments.

Do not submit to http://www.regulations.gov information for which disclosure is restricted by statute, such as trade secrets and commercial or financial information (hereinafter referred to as Confidential Business Information (“CBI”)). Comments submitted through http://www.regulations.gov cannot be claimed as CBI. Comments received through the website will waive any CBI claims for the information submitted. For information on submitting CBI, see the Confidential Business Information section.

DOE processes submissions made through http://www.regulations.gov before posting. Normally, comments will be posted within a few days of being submitted. However, if large volumes of comments are being processed simultaneously, your comment may not be viewable for up to several weeks. Please keep the comment tracking number that http://www.regulations.gov provides after you have successfully uploaded your comment.

Submitting comments via email, hand delivery, or mail. Comments and documents submitted via email, hand delivery, or mail also will be posted to http://www.regulations.gov. If you do not want your personal contact information to be publicly viewable, do not include it in your comment or any accompanying documents. Instead, provide your contact information on a cover letter. Include your first and last names, email address, telephone number, and optional mailing address. The cover letter will not be publicly viewable as long as it does not include any comments.

Include contact information each time you submit comments, data, documents, and other information to DOE. If you submit via mail or hand delivery, please provide all items on a CD, if feasible. It is not necessary to submit printed copies. No facsimiles (faxes) will be accepted.

Comments, data, and other information submitted to DOE electronically should be provided in PDF (preferred), Microsoft Word or Excel, WordPerfect, or text (ASCII) file format. Provide documents that are not secured, written in English and free of any defects or viruses. Documents should not contain special characters or any form of encryption and, if possible, they should carry the electronic signature of the author. ( printed page 51933)

Campaign form letters. Please submit campaign form letters by the originating organization in batches of between 50 to 500 form letters per PDF or as one form letter with a list of supporters' names compiled into one or more PDFs. This reduces comment processing and posting time.

Confidential Business Information. According to 10 CFR 1004.11, any person submitting information that he or she believes to be confidential and exempt by law from public disclosure should submit via email, postal mail, or hand delivery two well-marked copies: One copy of the document marked confidential including all the information believed to be confidential, and one copy of the document marked “non-confidential” with the information believed to be confidential deleted. Submit these documents via email or on a CD, if feasible. DOE will make its own determination about the confidential status of the information and treat it according to its determination.

Factors of interest to DOE when evaluating requests to treat submitted information as confidential include (1) a description of the items, (2) whether and why such items are customarily treated as confidential within the industry, (3) whether the information is generally known by or available from other sources, (4) whether the information has previously been made available to others without obligation concerning its confidentiality, (5) an explanation of the competitive injury to the submitting person which would result from public disclosure, (6) when such information might lose its confidential character due to the passage of time, and (7) why disclosure of the information would be contrary to the public interest.

It is DOE's policy that all comments may be included in the public docket, without change and as received, including any personal information provided in the comments (except information deemed to be exempt from public disclosure).

Signed in Washington, DC, on October 9, 2018.

Kathleen B. Hogan,

Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and Renewable Energy.

May 23, 2018

Ashley Armstrong

U.S. Department of Energy

Small Business Exemptions, Appliance Standards Program

Mailstop EE-5B

1000 Independence Avenue, SW

Washington, DC 20585

RE: Application for Small Business Exemption for Rough Service Bulbs

10 CFR430.32 (bb)

1) Applicant name is Aero-Tech Light Bulb Co., 534 Pratt Avenue, Schaumburg, IL 60193

2) We are applying for exemption of 10 CFR430.32 (bb)

3) Ray and Kathy Schlosser started Aero-Tech Light Bulb Co. in 1987 as a specialty 20,000 hour Rough Service Bulb Co. . After Osram Sylvania sold their Co to the Chinese in 2016, the Chinese did not wish to supply raw materials to my small factory in South Carolina; therefore I had to start importing Rough Service Light Bulbs from China. As of today my rough service light bulbs come from Everlite (H.K.) Ltd. In China, they are my Supplier.

4) Due to the ban on rough service light bulbs until January of 2020 that the Department of Energy was enforcing, I put together a business plan to implement my new LED bulb line with the time frame of getting my LED bulbs off and running by January of 2020 where it could replace the incandescent sales. Therefore we are asking for an exemption until January 25, 2020 because without it we won't be in business and we will have to close our doors. If we don't continue to sell it will reduce the competition and eliminate ourselves as a player as we are a competitor of a number of Lighting Companies.

5) Our 2016 and 2017 tax return is attached for your review

6) Failure to grant this exemption would mean that our sales would decrease further. We need our Incandescent line to continue to maintain our Revenues in addition to the LED line of products. Without these bulbs we will lose a good portion of our customer base. We would lose 70% of our business.

If you require any additional information, please feel free to contact me at the below email address or call me direct at 847-352-4900, press 0 to Page Ray. We urgently await your reply we are out of stock on a number of key items that we need to reorder.

Sincerely,

Ray M. Schlosser,

President.

Footnotes

1.

                     All references to EPCA in this document refer to the statute as amended through the EPS Improvement Act of 2017, [Public Law 115-115](https://www.govinfo.gov/link/plaw/115/public/115) (January 12, 2018).

Back to Citation 2.

                     For editorial reasons, upon codification in the U.S. Code, Part B was redesignated as Part A.

Back to Citation [FR Doc. 2018-22373 Filed 10-12-18; 8:45 am]

BILLING CODE 6450-01-P

Published Document: 2018-22373 (83 FR 51931)