Legal Status This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.

The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to About the Federal Register on NARA's archives.gov.

The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.

Legal Status

Notice

Carbon and Certain Alloy Steel Wire Rod From Brazil, Indonesia, Mexico, Moldova, and Trinidad and Tobago: Continuation of Antidumping Duty Orders and Countervailing Duty Order

A Notice by the International Trade Administration on 03/02/2026

• 1.

1.

• Document Details Published Content - Document Details Agencies Department of Commerce International Trade Administration Agency/Docket Number A-201-830, A-274-804, A-351-832, A-560-815, A-841-805, C-351-833 Document Citation 91 FR 10071 Document Number 2026-04121 Document Type Notice Pages 10071-10072
  (2 pages) Publication Date 03/02/2026 Published Content - Document Details

• PDF Official Content

  • View printed version (PDF) Official Content

• Document Details Published Content - Document Details Agencies Department of Commerce International Trade Administration Agency/Docket Number A-201-830, A-274-804, A-351-832, A-560-815, A-841-805, C-351-833 Document Citation 91 FR 10071 Document Number 2026-04121 Document Type Notice Pages 10071-10072
  (2 pages) Publication Date 03/02/2026 Published Content - Document Details

• Document Dates Published Content - Document Dates Dates Text Applicable February 24, 2026. Published Content - Document Dates

• Table of Contents Enhanced Content - Table of Contents This table of contents is a navigational tool, processed from the
  headings within the legal text of Federal Register documents.
  This repetition of headings to form internal navigation links
  has no substantive legal effect.

  • AGENCY:
  • SUMMARY:
  • DATES:
  • FOR FURTHER INFORMATION CONTACT:
  • SUPPLEMENTARY INFORMATION:
  • Background
  • Scope of the Orders
  • Continuation of the Orders
  • Administrative Protective Order (APO)
  • Notification to Interested Parties
  • Footnotes Enhanced Content - Table of Contents

• Public Comments Enhanced Content - Public Comments This feature is not available for this document.

Enhanced Content - Public Comments
- Regulations.gov Data Enhanced Content - Regulations.gov Data Additional information is not currently available for this document.

Enhanced Content - Regulations.gov Data

- Sharing Enhanced Content - Sharing Shorter Document URL https://www.federalregister.gov/d/2026-04121 Email Email this document to a friend Enhanced Content - Sharing

• Print Enhanced Content - Print
  • Print this document Enhanced Content - Print
• Document Statistics Enhanced Content - Document Statistics Document page views are updated periodically throughout the day and are cumulative counts for this document. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.

Page views 23
as of
03/01/2026 at 4:15 am EST Enhanced Content - Document Statistics
- Other Formats Enhanced Content - Other Formats This document is also available in the following formats:

JSON Normalized attributes and metadata XML Original full text XML MODS Government Publishing Office metadata More information and documentation can be found in our developer tools pages.

Enhanced Content - Other Formats
- Public Inspection Public Inspection This PDF is FR Doc. 2026-04121 as it appeared on Public Inspection on
02/27/2026 at 8:45 am.

It was viewed
13
times while on Public Inspection.

If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507. Learn more here.

Public Inspection
Published Document: 2026-04121 (91 FR 10071) This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Document Headings Document headings vary by document type but may contain
the following:

1. the agency or agencies that issued and signed a document
2. the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to
3. the agency docket number / agency internal file number
4. the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details.

Department of Commerce

International Trade Administration

1. [A-201-830, A-274-804, A-351-832, A-560-815, A-841-805, C-351-833]

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

As a result of the determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC) that revocation of the antidumping duty (AD) orders on carbon and certain alloy steel wire rod (wire rod) from Brazil, Indonesia, Mexico, Moldova, and Trinidad and Tobago and revocation of the countervailing duty (CVD) order on wire rod from Brazil would likely lead to the continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, Commerce is publishing a notice of continuation of these AD orders and CVD order.

DATES:

Applicable February 24, 2026.

FOR FURTHER INFORMATION CONTACT:

David De Falco, Trade Agreements Policy and Negotiations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-2178.

SUPPLEMENTARY INFORMATION:

Background

On October 22, 2002, Commerce published in the Federal Register the CVD order on wire rod from Brazil. [1 ] On October 29, 2002, Commerce published the AD orders on wire rod from Brazil, Indonesia, Mexico, Moldova, and Trinidad and Tobago. [2 ] On July 1, 2026, the ITC instituted, [3 ] and Commerce initiated, [4 ] the fourth sunset review of the Orders, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). As a result of its reviews, Commerce determined that revocation of the Orders would likely lead to the continuation or recurrence of dumping and countervailable subsidies, and therefore, notified the ITC of the magnitude of the margins of dumping and subsidy rates likely to prevail should the Orders be revoked. [5 ]

On February 24, 2026, the ITC published its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the Orders would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. [6 ]

Scope of the Orders

The merchandise subject to these Orders is certain hot-rolled products of carbon steel and alloy steel, in coils, of approximately round cross section, 5.00 mm or more, but less than 19.00 mm, in solid cross-sectional diameter.

Specifically excluded are steel products possessing the above-noted physical characteristics and meeting the Harmonized Tariff Schedule of the United States (HTSUS) definitions for (a) stainless steel; (b) tool steel; (c) high nickel steel; (d) ball bearing steel; and (e) concrete reinforcing bars and rods. Also excluded are (f) free machining steel products (i.e., products that contain by weight one or more of the following elements: 0.03 percent or more of lead, 0.05 percent or more of bismuth, 0.08 percent or more of sulfur, more than 0.04 percent of phosphorus, more than 0.05 percent of selenium, or more than 0.01 percent of tellurium).

Also excluded from the scope are 1080 grade tire cord quality wire rod and 1080 grade tire bead quality wire rod. This grade 1080 tire cord quality rod is defined as: (i) grade 1080 tire cord quality wire rod measuring 5.0 mm or more but not more than 6.0 mm in cross-sectional diameter; (ii) with an average partial decarburization of no more than 70 microns in depth (maximum individual 200 microns); (iii) having no non-deformable inclusions greater than 20 microns and no deformable inclusions greater than 35 microns; (iv) having a carbon ( printed page 10072) segregation per heat average of 3.0 or better using European Method NFA 04-114; (v) having a surface quality with no surface defects of a length greater than 0.15 mm; (vi) capable of being drawn to a diameter of 0.30 mm or less with 3 or fewer breaks per ton; and (vii) containing by weight the following elements in the proportions shown: (1) 0.78 percent or more of carbon, (2) less than 0.01 percent of aluminum, (3) 0.040 percent or less, in the aggregate, of phosphorus and sulfur, (4) 0.006 percent or less of nitrogen, and (5) not more than 0.15 percent, in the aggregate, of copper, nickel and chromium.

This grade 1080 tire bead quality rod is defined as: (i) grade 1080 tire bead quality wire rod measuring 5.5 mm or more but not more than 7.0 mm in cross-sectional diameter; (ii) with an average partial decarburization of no more than 70 microns in depth (maximum individual 200 microns); (iii) having no non-deformable inclusions greater than 20 microns and no deformable inclusions greater than 35 microns; (iv) having a carbon segregation per heat average of 3.0 or better using European Method NFA 04-114; (v) having a surface quality with no surface defects of a length greater than 0.2 mm; (vi) capable of being drawn to a diameter of 0.78 mm or larger with 0.5 or fewer breaks per ton; and (vii) containing by weight the following elements in the proportions shown: (1) 0.78 percent or more of carbon, (2) less than 0.01 percent of soluble aluminum, (3) 0.040 percent or less, in the aggregate, of phosphorus and sulfur, (4) 0.008 percent or less of nitrogen, and (5) either not more than 0.15 percent, in the aggregate, of copper, nickel and chromium (if chromium is not specified), or not more than 0.10 percent in the aggregate of copper and nickel and a chromium content of 0.24 to 0.30 percent (if chromium is specified). For purposes of the grade 1080 tire cord quality wire rod and the grade 1080 tire bead quality wire rod, an inclusion will be considered to be deformable if its ratio of length (measured along the axis—that is, the direction of rolling—of the rod) over thickness (measured on the same inclusion in a direction perpendicular to the axis of the rod) is equal to or greater than three. The size of an inclusion for purposes of the 20 microns and 35 microns limitations is the measurement of the largest dimension observed on a longitudinal section measured in a direction perpendicular to the axis of the rod. This measurement methodology applies only to inclusions on certain grade 1080 tire cord quality wire rod and certain grade 1080 tire bead quality wire rod that are entered, or withdrawn from warehouse, for consumption on or after July 24, 2003.

The designation of the products as “tire cord quality” or “tire bead quality” indicates the acceptability of the product for use in the production of tire cord, tire bead, or wire for use in other rubber reinforcement applications such as hose wire. These quality designations are presumed to indicate that these products are being used in tire cord, tire bead, and other rubber reinforcement applications, and such merchandise intended for the tire cord, tire bead, or other rubber reinforcement applications is not included in the scope. However, should the petitioners or other interested parties provide a reasonable basis to believe or suspect that there exists a pattern of importation of such products for other than those applications, end-use certification for the importation of such products may be required. Under such circumstances, only the importers of record would normally be required to certify the end use of the imported merchandise.

All products meeting the physical description of subject merchandise that are not specifically excluded are included in this scope. The products subject to this order are currently classifiable under subheadings 7213.91.3011, 7213.91.3015, 7213.91.3092, 7213.91.4500, 7213.91.6000, 7213.99.0030, 7213.99.0090, 7227.20.0000, 7227.90.6010, and 7227.90.6080 of the HTSUS.

On July 9, 2008, in response to a request from the National Import Specialist, we added the following HTSUS subheadings: 7213.91.3020, 7213.91.3093, 7227.20.0030, 7227.20.0080, 7227.90.6020, and 7227.90.6085. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this proceeding is dispositive.

Continuation of the Orders

As a result of the determinations by Commerce and the ITC that revocation of the Orders would likely lead to continuation or recurrence of dumping, countervailable subsidies, and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Orders. U.S. Customs and Border Protection will continue to collect AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise.

The effective date of the continuation of the Orders will be February 24, 2026. [7 ] Pursuant to section 751(c)(2) of the Act and 19 CFR 351.218(c)(2), Commerce intends to initiate the next five-year reviews of the Orders not later than 30 days prior to fifth anniversary of the date of the last determination by the ITC.

Administrative Protective Order (APO)

This notice also serves as a final reminder to parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.

Notification to Interested Parties

These five-year (sunset) reviews and this notice are in accordance with sections 751(c) and 751(d)(2) of the Act and published in accordance with section 777(i) of the Act and 19 CFR 351.218(f)(4).

Dated: February 25, 2026.

Scot Fullerton,

Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations.

Footnotes

1. See Notice of Countervailing Duty Orders: Carbon and Certain Alloy Steel Wire Rod from Brazil and Canada, 67 FR 64871 (October 22, 2002) (CVD Order).

Back to Citation 2. See Notice of Antidumping Duty Orders: Carbon and Certain Alloy Steel Wire Rod from Brazil, Indonesia, Mexico, Moldova, Trinidad and Tobago, and Ukraine, 67 FR 65945 (October 29, 2002); and CVD Order (collectively, Orders).

Back to Citation 3. See Carbon and Certain Alloy Steel Wire Rod from Brazil, Indonesia, Mexico, Moldova, and Trinidad and Tobago; Institution of Five-Year Reviews, 90 FR 28783 (July 1, 2025).

Back to Citation 4. See Initiation of Five-Year (Sunset) Reviews, 90 FR 28722 (July 1, 2025).

Back to Citation 5. See Carbon and Certain Alloy Steel Wire Rod from Brazil, Indonesia, Mexico, Moldova, and Trinidad and Tobago: Final Results of the Expedited Fourth Sunset Reviews of the Antidumping Duty Orders, 91 FR 958 (January 9, 2026), see also Carbon and Certain Alloy Steel Wire Rod from Brazil: Final Results of the Expedited Fourth Sunset Review of the Countervailing Duty Order, 91 FR 966 (January 9, 2026).

Back to Citation 6. See Carbon and Certain Alloy Steel Wire Rod from Brazil, Indonesia, Mexico, Moldova, and Trinidad and Tobago; Determinations, 91 FR 8899 (February 24, 2026) (ITC Final Determination).

Back to Citation 7. See ITC Final Determination.

Back to Citation [FR Doc. 2026-04121 Filed 2-27-26; 8:45 am]

BILLING CODE 3510-DS-P

Published Document: 2026-04121 (91 FR 10071)